A JFY-vel csökkentheti a piacra jutási időt
Az N a következő generációt jelenti. Az X azt a technológiai platformot jelöli, amelyen működik. A T a TJS-re utal: a nyugati fejlesztésű vezérlésre, amely már a képernyő első érintésekor megmutatja különlegességét. A BFC+ NXT a teljes TRUMPF optikai láncot a JFY saját fejlesztésű TJS Cut-90 vezérlésével és német alap-hardverrel ötvözi: irányított kezelés, uniós adat-szuverenitás és egyetlen zökkenőmentes munkafolyamat az irodától a gyártócsarnokig. Vékony lemezek, vastag lemezek, szerkezeti acél, rozsdamentes acél, alumínium, réz. Egy gép. Nincs kifogás. Az ára pedig tudja, hogy Önnek egy vállalkozást kell működtetnie.
Teljes TRUMPF optikai rendszer a legjobb eredményekért
A BFC+ NXT teljes TRUMPF TruFiber lézert és DualRange vágófejet helyez egy valódi ipari környezetre tervezett gépbe: nincs kompromisszum a fontos dolgokban, és nincs felesleges költség.
Vékonyat és vastagot is vág. Nem számít neki.
Kettős fókuszátmérő, változtatható fókusz és SmartGuard ütközésvédelem védi a fejet a költséges ütközésektől. Egy gép, amely reggel 1 mm-es rozsdamentes acélt, délután pedig 25 mm-es szerkezeti acélt dolgoz fel paramétervita nélkül. Kevesebb beállítási idő, kevesebb megszakítás, nagyobb műszakonkénti teljesítmény.
Új kezelője már ebédidőre munkára kész.
A TJS Cut-90 lépésről lépésre vezeti végig csapatát a folyamaton: importálás, Laser Tech, Quick-Nest, utófeldolgozás. Logikus és áttekinthető. Nem számít, hogy az íróasztalnál vagy közvetlenül a gépnél programoz: ugyanaz a felület, ugyanazok az adatok, egyetlen ökoszisztéma a JFY PLUS-szal. A vágás és a hajlítás egyetlen munkafolyamatban jelentősen csökkenti a programozási időt.
Golyóálló gépbiztonság
CE-tanúsítvánnyal rendelkező, fényzáró burkolat, lézerbiztos ablak, védő fényfüggönyök, porelszívás és teljes EMC-megfelelőség. Ez nem puszta matrica, hanem dokumentált és ellenőrizhető uniós biztonsági szabvány. A biztosítója nyugodtan alhat. Ön is.
Ha meghibásodik, gyorsan megjavítjuk.
Helyi szervizhálózat. Lézerjavító központ Németországban. A TJS Cut-90 alapvető hardverelemeinek pótalkatrészei európai raktárkészletről érhetők el. Az állásidőt nem hetekben mérjük – és Önnek sem kellene.
Jellemzők és teljesítmény
Részletek
TRUMPF TruFiber laser
- Superior beam quality: Precise beam quality definition enables accurate cutting.
- Ample power redundancy: Ensures stable operation and eliminates unplanned downtime.
- Optimal power stability: Optimal power stability of ±1% with closed-loop controller of the laser for reliable results in any processing.
- Best-in-class safety standards: Highest safety performance level: Performance Level e (PLe).
- SmartPierce: Less burn marks. Faster piercing. Protected cutting head. And on complex nested sheets with hundreds of pierce points, measurable cycle time reduction.
Intuitív vezérlőrendszer
- Equipped with a touch interaction interface, it supports one-click switching between programming and production modes. The function layout fits processing scenarios, and the full process follows ergonomic design for simple and efficient onboarding.
- Built with advanced processes including FlyCut and SmartJoint, it significantly improves batch processing efficiency for sheets, shortens workpiece processing cycles and steadily increases production output.
- With a brand-new built-in maintenance management module, users can access illustrated machine maintenance guides by scanning a QR code via mobile phone. Standard professional maintenance can be completed without specialized experience.
- It supports step-by-step upgrading from a stand-alone machine with automation ready interface to automated production lines, adapting to the needs of enterprises at different development stages and protecting the value of upfront investment.
Dual Range cutting unit
- Dual aspect ratio: Adaptive cutting unit with automatic adjustment of focal position and focal diameter, plus capacitive height measurement. Handles both thin sheet (high-speed, small kerf) and thick sheet (high-power, wide kerf) in a single unit.
- SafeGuard / Collision Protection: X/Y-direction cushioning of the cutting unit prevents mechanical damage and reduces spare part costs. Fast reset to original position, reduced downtimes, and quick re-entry after collisions—without predetermined breaking points.
- Condition checking of protective glass: Online monitoring of protective glass contamination to avoid rejects and machine damage. Preventive warning system and efficient consumable management: replacement only when required, eliminating manual testing.
Kiváló stabilitás és pontosság
- Hegesztett gépágy a kiváló torziós merevség érdekében, amely biztosítja a nagy alkatrészpontosságot.
- Szekcionált hegesztési technológia a legújabb gyártási szabványoknak megfelelően.
- High structural integrity and dynamic performance due to finite element analysis (FEA) optimized machine bed.
Cross Beam
- The cross beam of the BFC+ NXT series is made of high quality and lightweight steel and is therefore great rigidity with a well-balanced bearing capacity, very low thermal deformation and outstanding dynamic performance.
- Equipped with premium components to ensure high accuracy, reliability, and longer product life cycle, such as THK Guides, YYC racks, etc.
German manufacturing standard
- SHW 5-face machining center from Germany for all machining processes delivering high productivity with completely automatic multi-face machining and high-accuracy.
- Electronic detection devices exclusively assigned by TRUMPF are employed for guide rail installation to remove second time positioning, very suitable for long-stroke machine installations to reach the precision of 0.01 mm over the full machining length.
Automatikus csere munkaasztalok
- Tartós, nagy teljesítményű mozgóegységekkel felszerelt kettős csere munkaasztalok.
- Worktable exchange time of less than 30 seconds (3015 format) significantly increases work.
Műszaki adatok
| Tétel | BFC+ 3015NXT |
|---|---|
| Laser power | 12 kW |
| X & Y axis stroke | 3070x1545 mm |
| Z-axis stroke | 260 mm |
| Egyidejűleg | 140 m/min |
| Maximális gyorsulás | 1.4 g |
| CNC Control | TJS Cut-90 |
| Machine weigh | ≈ 7.600 kg |
| Max. loading capacity | 900 kg* |
Lézer adatok
| Anyag | Max. sheet thickness for TruFiber 12001 G |
|---|---|
| Enyhe acél | 40 mm* |
| Rozsdamentes acél | 40 mm* |
| Alumínium | 40 mm* |
| Sárgaréz | 12.7 mm |
| Réz | 12.7 mm |
* : Equipped with “automation-ready interface”, the maximum loading capacity is 900kg and the maximum sheet thickness is 25mm.