Zkrácení doby uvedení na trh s JFY

N znamená novou generaci. X označuje technologickou platformu, na které běží. T znamená TJS – západně vyvinuté řízení, které poznáte ihned po dotyku obrazovky. BFC+ NXT kombinuje kompletní optický řetězec TRUMPF s interním řízením JFY TJS Cut-90 na německém základním hardwaru: asistované ovládání, suverenita dat v EU a plynulý pracovní postup od kanceláře až po dílnu. Tenké plechy, silné desky, konstrukční ocel, nerezová ocel, hliník, měď. Jeden stroj. Žádné výmluvy. Cena, která ví, že řídíte firmu.

Kompletní optický systém TRUMPF pro nejlepší výsledky

BFC+ NXT kombinuje plnohodnotný laser TRUMPF TruFiber a řezací hlavu DualRange ve stroji vytvořeném pro reálný svět: žádné kompromisy v tom, na čem záleží, a žádné náklady na to, co není důležité.

Řeže tenké i tlusté materiály. Na ničem nezáleží.

Dvojitý ohniskový průměr, variabilní ohnisko a antikolizní systém SmartGuard chrání hlavu před nákladnými kolizemi. Jeden stroj zvládne ranní 1mm nerezovou ocel i odpolední 25mm konstrukční ocel bez řešení parametrů. Méně času na nastavení, méně přerušení, vyšší výkon za směnu.

Váš nový operátor je připraven k práci už před obědem.

TJS Cut-90 provede váš tým krok za krokem: Import, Laser Tech, Quick-Nest, následné zpracování. Logické a přehledné. Nezáleží na tom, zda programujete u stolu nebo přímo u stroje: stejné rozhraní, stejná data, jeden ekosystém s JFY PLUS. Řezání a ohýbání v jediném pracovním postupu vám ušetří značné množství programovacího času.

Neprůstřelná bezpečnost stroje

Kryt s certifikací CE a světlotěsným provedením, laserově bezpečné okno, ochranné světelné závory, odsávání prachu a plná shoda s požadavky EMC. Nejde jen o nálepku, ale o zdokumentovaný a ověřitelný bezpečnostní standard EU. Vaše pojišťovna bude klidně spát. Vy také.

Když se porouchá, rychle ho opravíme.

Lokální servisní síť. Laserové opravárenské centrum v Německu. Náhradní díly pro základní hardware TJS Cut-90 z evropských skladů. Odstávky neměříme v týdnech – a vy byste také neměli.

Funkce a výkon

TRUMPF TruFiber laser
  • Superior beam quality: Precise beam quality definition enables accurate cutting.
  • Ample power redundancy: Ensures stable operation and eliminates unplanned downtime.
  • Optimal power stability: Optimal power stability of ±1% with closed-loop controller of the laser for reliable results in any processing.
  • Best-in-class safety standards: Highest safety performance level: Performance Level e (PLe).
  • SmartPierce: Less burn marks. Faster piercing. Protected cutting head. And on complex nested sheets with hundreds of pierce points, measurable cycle time reduction.
  • Equipped with a touch interaction interface, it supports one-click switching between programming and production modes. The function layout fits processing scenarios, and the full process follows ergonomic design for simple and efficient onboarding.
  • Built with advanced processes including FlyCut and SmartJoint, it significantly improves batch processing efficiency for sheets, shortens workpiece processing cycles and steadily increases production output.
  • With a brand-new built-in maintenance management module, users can access illustrated machine maintenance guides by scanning a QR code via mobile phone. Standard professional maintenance can be completed without specialized experience.
  • It supports step-by-step upgrading from a stand-alone machine with automation ready interface to automated production lines, adapting to the needs of enterprises at different development stages and protecting the value of upfront investment.
  • Dual aspect ratio: Adaptive cutting unit with automatic adjustment of focal position and focal diameter, plus capacitive height measurement. Handles both thin sheet (high-speed, small kerf) and thick sheet (high-power, wide kerf) in a single unit.
  • SafeGuard / Collision Protection: X/Y-direction cushioning of the cutting unit prevents mechanical damage and reduces spare part costs. Fast reset to original position, reduced downtimes, and quick re-entry after collisions—without predetermined breaking points.
  • Condition checking of protective glass: Online monitoring of protective glass contamination to avoid rejects and machine damage. Preventive warning system and efficient consumable management: replacement only when required, eliminating manual testing.
  • Svařované lože stroje pro vynikající torzní tuhost zajišťující vysokou přesnost dílů.
  • Technologie sekčního svařování podle nejnovějších výrobních norem.
  • High structural integrity and dynamic performance due to finite element analysis (FEA) optimized machine bed.
  • The cross beam of the BFC+ NXT series is made of high quality and lightweight steel and is therefore great rigidity with a well-balanced bearing capacity, very low thermal deformation and outstanding dynamic performance.
  • Equipped with premium components to ensure high accuracy, reliability, and longer product life cycle, such as THK Guides, YYC racks, etc.
  • SHW 5-face machining center from Germany for all machining processes delivering high productivity with completely automatic multi-face machining and high-accuracy.
  • Electronic detection devices exclusively assigned by TRUMPF are employed for guide rail installation to remove second time positioning, very suitable for long-stroke machine installations to reach the precision of 0.01 mm over the full machining length.
  • Dvojité výměnné pracovní stoly vybavené odolnými, vysoce výkonnými pohybovými jednotkami.
  • Worktable exchange time of less than 30 seconds (3015 format) significantly increases work.
PoložkaBFC+ 3015NXT
Laser power12 kW
X & Y axis stroke3070x1545 mm
Z-axis stroke260 mm
Současně140 m/min
Maximální zrychlení1.4 g
CNC ControlTJS Cut-90
Machine weigh≈ 7.600 kg
Max. loading capacity900 kg*
MateriálMax. sheet thickness for TruFiber 12001 G
Měkká ocel40 mm*
Nerezová ocel40 mm*
Hliník40 mm*
Mosazné12.7 mm
Měď12.7 mm

* : Equipped with “automation-ready interface”, the maximum loading capacity is 900kg and the maximum sheet thickness is 25mm.

Přihlášení na portál JFY

 

Členství

Platnost končí na