Reducerea timpului de lansare pe piață cu JFY

N înseamnă Next Generation. X se referă la platforma tehnologică pe care funcționează. T înseamnă TJS: sistemul de control dezvoltat în Occident, care face diferența din momentul în care atingeți ecranul. BFC+ NXT combină un lanț optic TRUMPF complet cu sistemul de control JFY TJS Cut-90, dezvoltat intern, pe hardware german: operare ghidată, suveritatea datelor în UE și un flux de lucru continuu de la birou până în hala de producție. Table subțiri, plăci groase, oțel carbon, oțel inoxidabil, aluminiu și cupru. O singură mașină. Fără scuze. Un preț care știe că aveți o afacere de condus.

Sistem optic TRUMPF complet pentru rezultate optime

BFC+ NXT integrează un laser TRUMPF TruFiber complet și un cap de tăiere DualRange într-o mașină construită pentru lumea reală: fără compromisuri în ceea ce contează și fără costuri pentru ceea ce nu contează.

Taie subțire. Taie gros. Nu contează.

Diametru focal dublu, focalizare variabilă și sistem anticoli ziune SmartGuard pentru protejarea capului împotriva coliziunilor costisitoare. O singură mașină prelucrează tabla inoxidabilă de 1 mm dimineața și oțelul carbon de 25 mm după-amiaza, fără discuții despre parametri. Mai puțin timp de configurare, mai puține întreruperi și o productivitate mai mare pe schimb.

Noul dumneavoastră operator este pregătit de lucru până la prânz.

TJS Cut-90 vă ghidează echipa pas cu pas: import, Laser Tech, Quick-Nest și post-procesare. Totul este logic și intuitiv. Nu contează dacă programați la birou sau direct la mașină: aceeași interfață, aceleași date și un singur ecosistem cu JFY PLUS. Debitarea și îndoirea într-un singur flux de lucru reduc semnificativ timpul de programare.

Siguranța mașinii antiglonț

Incintă certificată CE și etanșă la lumină, fereastră sigură pentru laser, bariere luminoase de protecție, aspirarea prafului și conformitate EMC completă. Nu este doar un autocolant, ci un standard de siguranță UE documentat și verificabil. Compania dumneavoastră de asigurări va dormi liniștită. Și dumneavoastră.

Dacă se defectează, îl reparăm. Rapid.

Rețea locală de service. Centru de reparații laser în Germania. Piese de schimb pentru hardware-ul de bază al TJS Cut-90 din stocuri europene. Nu măsurăm timpul de nefuncționare în săptămâni și nici dumneavoastră nu ar trebui.

Caracteristici și performanțe

TRUMPF TruFiber laser
  • Superior beam quality: Precise beam quality definition enables accurate cutting.
  • Ample power redundancy: Ensures stable operation and eliminates unplanned downtime.
  • Optimal power stability: Optimal power stability of ±1% with closed-loop controller of the laser for reliable results in any processing.
  • Best-in-class safety standards: Highest safety performance level: Performance Level e (PLe).
  • SmartPierce: Less burn marks. Faster piercing. Protected cutting head. And on complex nested sheets with hundreds of pierce points, measurable cycle time reduction.
  • Equipped with a touch interaction interface, it supports one-click switching between programming and production modes. The function layout fits processing scenarios, and the full process follows ergonomic design for simple and efficient onboarding.
  • Built with advanced processes including FlyCut and SmartJoint, it significantly improves batch processing efficiency for sheets, shortens workpiece processing cycles and steadily increases production output.
  • With a brand-new built-in maintenance management module, users can access illustrated machine maintenance guides by scanning a QR code via mobile phone. Standard professional maintenance can be completed without specialized experience.
  • It supports step-by-step upgrading from a stand-alone machine with automation ready interface to automated production lines, adapting to the needs of enterprises at different development stages and protecting the value of upfront investment.
  • Dual aspect ratio: Adaptive cutting unit with automatic adjustment of focal position and focal diameter, plus capacitive height measurement. Handles both thin sheet (high-speed, small kerf) and thick sheet (high-power, wide kerf) in a single unit.
  • SafeGuard / Collision Protection: X/Y-direction cushioning of the cutting unit prevents mechanical damage and reduces spare part costs. Fast reset to original position, reduced downtimes, and quick re-entry after collisions—without predetermined breaking points.
  • Condition checking of protective glass: Online monitoring of protective glass contamination to avoid rejects and machine damage. Preventive warning system and efficient consumable management: replacement only when required, eliminating manual testing.
  • Pat de mașină sudat pentru o rigiditate superioară la torsiune, asigurând o precizie ridicată a pieselor.
  • Tehnologie de sudare secțională în conformitate cu cele mai recente standarde de fabricație.
  • High structural integrity and dynamic performance due to finite element analysis (FEA) optimized machine bed.
  • The cross beam of the BFC+ NXT series is made of high quality and lightweight steel and is therefore great rigidity with a well-balanced bearing capacity, very low thermal deformation and outstanding dynamic performance.
  • Equipped with premium components to ensure high accuracy, reliability, and longer product life cycle, such as THK Guides, YYC racks, etc.
  • SHW 5-face machining center from Germany for all machining processes delivering high productivity with completely automatic multi-face machining and high-accuracy.
  • Electronic detection devices exclusively assigned by TRUMPF are employed for guide rail installation to remove second time positioning, very suitable for long-stroke machine installations to reach the precision of 0.01 mm over the full machining length.
  • Mese de lucru cu schimb dublu echipate cu unități de mișcare durabile, de înaltă performanță.
  • Worktable exchange time of less than 30 seconds (3015 format) significantly increases work.
ArticolulBFC+ 3015NXT
Laser power12 kW
X & Y axis stroke3070x1545 mm
Z-axis stroke260 mm
Simultan140 m/min
Accelerație max.1.4 g
CNC ControlTJS Cut-90
Machine weigh≈ 7.600 kg
Max. loading capacity900 kg*
MaterialMax. sheet thickness for TruFiber 12001 G
Oțel moale40 mm*
Oțel inoxidabil40 mm*
Aluminiu40 mm*
Alamă12.7 mm
Cupru12.7 mm

* : Equipped with “automation-ready interface”, the maximum loading capacity is 900kg and the maximum sheet thickness is 25mm.

Autentificare portal JFY

 

Calitatea de membru

Expiră