Punching is back
Produce more. Set up less.
38 tools load simultaneously, so entire cabinet job families run without interruption. No manual tool swapping mid-run. Less changeover. More parts per shift.
±0.1 mm. Shift after shift
SHW processing frame and closed-loop servo ensures ±0.1 mm hit accuracy under continuous high-frequency punching, with no drift over time. Precision you can quote to your customers.
Less scrap. Shorter cycles.
Integrated nesting, costing, and sequencing deliver 8-15% better material utilization versus manual layout. No trial cuts, no wasted sheet. Shorter cycle times, automatically.
Programming on autopilot
JFY PUNCH programs punching parts automatically with sequence optimization, cluster tooling, micro joints, zero manual input. Connect to JFY PLUS and program Cut, Punch, and Bend in one interface and one workflow.
Forms no laser can make
Louvers, extrusions, tapped holes, ribs, knockouts: all in one program, on one machine. If your parts need forming, only punching delivers it.
Features and Performance
Details
38-station turret
Keep punching, forming, louver and tools loaded at the same time. Fewer tool changes keep batch jobs running instead of waiting for setup.
38 stations for a broad mix of punching and forming tools.
Quick-release lower dies simplify between-job changes.
Supports longer runs with fewer manual interruptions
Auto-index rotary station
Produce angled louvers, lances and other directional forms under CNC control. The tool rotates through 360 degrees, avoiding separate tools for every orientation.
Less duplicate tooling and lower risk of loading the wrong tool.
Rotary operations remain part of the CNC program.
Floating clamp system
Keep the sheet controlled while allowing the required movement during processing. Material-drop detection and clamp protection stop the machine before a misaligned sheet or unsafe stroke causes damage.
Detects sheet movement before the next punch stroke.
Position monitoring helps prevent die-to-clamp collisions.
Protects long nested runs with less operator supervision.
Servo punching drive
The direct-drive servo delivers punching power immediately and uses energy in proportion to the work performed. Air cooling and closed-loop control support stable, repeatable forming.
High-torque direct-drive motor with overload capacity.
Air cooling avoids coolant-related service concerns.
Closed-loop control keeps the forming depth consistent.
Machine frame
The closed welded frame, five-face SHW machining and finite-element design help keep the machine geometry stable during high-frequency punching. A common coordinate system supports consistent accuracy across the shift.
Rigid closed structure designed to resist deformation.
Key reference surfaces are machined in one coordinate system.
Supports the specified ±0.1 mm punching accuracy.
FANUC CNC system
A familiar CNC platform simplifies operation, maintenance and support. Existing FANUC experience can transfer to the MT300E without learning a proprietary control environment from scratch.
Five controlled axes: X, Y, V, T and C.
Familiar diagnostics and service practices.
FANUC support infrastructure is available across major markets.
Technical Data
| Specification | MT+ 300E-2515 |
|---|---|
| Max. punch force | 300 kN |
| Main driving type | Servo motor |
| Max. sheet processing size (with one time repositioning) | 5000x1500 mm |
| Max. processing sheet thickness | 6 mm |
| Max. punch diameter per time | Φ88.9 mm |
| Max. punch stroke | 32 mm |
| No. of clamps | 3 pcs |
| No. of stations | 32 pcs |
| No. of auto index | 2 (C) pcs |
| Punching accuracy | ±0.1 mm |
| Max. feeding speed - X Axis | 80 m/min |
| Max. feeding speed - Y Axis | 80 m/min |
| Max. feeding speed - XY Combined | 113 m/min |
| Worktable Selection - For thickness 3 mm and below | Fine brush fixed worktable |
| Worktable Selection - For thickness 3-4 mm | Brush and steel ball fixed worktable |
| Worktable Selection - For thickness 4-6 mm | All steel ball fixed worktable |
| Max. punch hit at 1 mm pitch with 6 mm stroke | 750 hpm |
| Max. punch hit at 25 mm pitch with 6 mm stroke | 400 hpm |
| Turret speed | 30 rpm |
| CNC system | FANUC |
| No. of controlling axis | 5 (X, Y, V, T, C) pcs |
| Dimension (Including safety fence) | 7026×7900×2360 mm |