JFY MT+ 300E Punching Machine

Punching is back

Ez az új generációs termék költséghatékonyabb stancolási megoldást kínál a felhasználók számára, miközben magas stabilitást és kiváló megmunkálási minőséget biztosít.

Gyártson többet. Állítson be kevesebbet.

A gép egyszerre 38 szerszámot tud befogadni, így a teljes szekréngyártási munkacsaládok megszakítás nélkül futhatnak. Nincs szükség a szerszámok kézi cseréjére a gyártás közben. Kevesebb átállás. Több alkatrész műszakonként.

±0,1 mm. Műszakról műszakra

Az SHW megmunkálókeret és a zárt szabályozási körű szervorendszer ±0,1 mm-es stancolási pontosságot biztosít folyamatos, nagy frekvenciájú stancolás mellett, időbeli eltolódás nélkül. Olyan pontosság, amelyet garantálhat ügyfeleinek.

Kevesebb selejt. Rövidebb ciklusok.

Az integrált lemeztervezés, költségszámítás és sorrendtervezés kézi elrendezéshez képest 8–15%-kal jobb anyagkihasználást biztosít. Nincs próbavágás, nincs elpazarolt lemez. Automatikusan rövidebb ciklusidők.

Programozás autopilóta üzemmódban

A JFY PUNCH automatikusan programozza a stancolási feladatokat sorrendoptimalizálással, csoportosított szerszámhasználattal, mikrohíddal és kézi bevitel nélkül. Csatlakoztassa a JFY PLUS rendszerhez, és programozza a vágást, stancolást és hajlítást egyetlen felületen és munkafolyamatban.

Formák, amelyeket egyetlen lézer sem tud elkészíteni

Lamellák, kihúzások, menetfuratok, bordák és kivágások – mindez egyetlen programban és egyetlen gépen. Ha az alkatrészei formázást igényelnek, ezt csak a stancolás képes elvégezni.

Jellemzők és teljesítmény

38-station turret

Keep punching, forming, louver and tools loaded at the same time. Fewer tool changes keep batch jobs running instead of waiting for setup.

  • 38 stations for a broad mix of punching and forming tools.

  • Quick-release lower dies simplify between-job changes.

  • Supports longer runs with fewer manual interruptions

     

Produce angled louvers, lances and other directional forms under CNC control. The tool rotates through 360 degrees, avoiding separate tools for every orientation.

  • Less duplicate tooling and lower risk of loading the wrong tool.

  • Rotary operations remain part of the CNC program.

Keep the sheet controlled while allowing the required movement during processing. Material-drop detection and clamp protection stop the machine before a misaligned sheet or unsafe stroke causes damage.

  • Detects sheet movement before the next punch stroke.

  • Position monitoring helps prevent die-to-clamp collisions.

  • Protects long nested runs with less operator supervision.

The direct-drive servo delivers punching power immediately and uses energy in proportion to the work performed. Air cooling and closed-loop control support stable, repeatable forming.

  • High-torque direct-drive motor with overload capacity.

  • Air cooling avoids coolant-related service concerns.

  • Closed-loop control keeps the forming depth consistent.

The closed welded frame, five-face SHW machining and finite-element design help keep the machine geometry stable during high-frequency punching. A common coordinate system supports consistent accuracy across the shift.

  • Rigid closed structure designed to resist deformation.

  • Key reference surfaces are machined in one coordinate system.

  • Supports the specified ±0.1 mm punching accuracy.

A familiar CNC platform simplifies operation, maintenance and support. Existing FANUC experience can transfer to the MT300E without learning a proprietary control environment from scratch.

  • Five controlled axes: X, Y, V, T and C.

  • Familiar diagnostics and service practices.

  • FANUC support infrastructure is available across major markets.

SpecificationMT+ 300E-2515
Max. punch force300 kN
Fő hajtástípusServo motor
Max. munkadarab mérete [egy pozicionálással]5000x1500 mm
Max. anyagvastagság6 mm
Max. punch diameter per timeΦ88.9 mm
Max. lyukasztási löket32 mm
No. of clamps3 db
No. of stations32 pcs
Automatikus indexelések száma2 (C) pcs
Lyukasztási pontosság±0.1 mm
Max. feeding speed - X Axis80 m/perc
Max. feeding speed - Y Axis80 m/perc
Max. feeding speed - XY Combined113 m/perc
Worktable Selection - For thickness 3 mm and belowFine brush fixed worktable
Worktable Selection - For thickness 3-4 mmBrush and steel ball fixed worktable
Worktable Selection - For thickness 4-6 mmAll steel ball fixed worktable
Max. punch hit at 1 mm pitch with 6 mm stroke750 hpm
Max. punch hit at 25 mm pitch with 6 mm stroke400 lpm
Forgóasztal fordulatszáma30 fordulat/perc
CNC rendszerFANUC
No. of controlling axis5 (X, Y, V, T, C) pcs
Dimension (Including safety fence)7026×7900×2360 mm

JFY portál bejelentkezés

 

Tagság

Lejárat: