Punching is back
Producete di più. Riducete i tempi di attrezzaggio.
È possibile caricare simultaneamente 38 utensili, consentendo di lavorare intere famiglie di commesse per armadi senza interruzioni. Nessun cambio manuale degli utensili durante il ciclo. Meno tempi di attrezzaggio. Più pezzi per turno.
±0,1 mm. Turno dopo turno
Il telaio di lavorazione SHW e il servosistema a circuito chiuso garantiscono una precisione di punzonatura di ±0,1 mm durante la punzonatura continua ad alta frequenza, senza derive nel tempo. Una precisione che potete garantire ai vostri clienti.
Meno scarti. Tempi di ciclo più brevi.
L’ottimizzazione integrata del nesting, dei costi e della sequenza consente un utilizzo del materiale migliore dell’8–15% rispetto alla disposizione manuale. Nessun taglio di prova, nessuna lamiera sprecata. Tempi ciclo automaticamente più brevi.
Programmazione con il pilota automatico
JFY PUNCH programma automaticamente i pezzi da punzonare con ottimizzazione della sequenza, utensili raggruppati, microgiunti e nessun inserimento manuale. Collegatevi a JFY PLUS e programmate taglio, punzonatura e piegatura in un’unica interfaccia e un unico flusso di lavoro.
Forme che nessun laser può realizzare
Feritoie, imbutiture, fori filettati, nervature e aperture sagomate: tutto in un unico programma e su un’unica macchina. Se i vostri pezzi richiedono formatura, solo la punzonatura può realizzarla.
Caratteristiche e prestazioni
Dettagli
38-station turret
Keep punching, forming, louver and tools loaded at the same time. Fewer tool changes keep batch jobs running instead of waiting for setup.
38 stations for a broad mix of punching and forming tools.
Quick-release lower dies simplify between-job changes.
Supports longer runs with fewer manual interruptions
Auto-index rotary station
Produce angled louvers, lances and other directional forms under CNC control. The tool rotates through 360 degrees, avoiding separate tools for every orientation.
Less duplicate tooling and lower risk of loading the wrong tool.
Rotary operations remain part of the CNC program.
Floating clamp system
Keep the sheet controlled while allowing the required movement during processing. Material-drop detection and clamp protection stop the machine before a misaligned sheet or unsafe stroke causes damage.
Detects sheet movement before the next punch stroke.
Position monitoring helps prevent die-to-clamp collisions.
Protects long nested runs with less operator supervision.
Servo punching drive
The direct-drive servo delivers punching power immediately and uses energy in proportion to the work performed. Air cooling and closed-loop control support stable, repeatable forming.
High-torque direct-drive motor with overload capacity.
Air cooling avoids coolant-related service concerns.
Closed-loop control keeps the forming depth consistent.
Machine frame
The closed welded frame, five-face SHW machining and finite-element design help keep the machine geometry stable during high-frequency punching. A common coordinate system supports consistent accuracy across the shift.
Rigid closed structure designed to resist deformation.
Key reference surfaces are machined in one coordinate system.
Supports the specified ±0.1 mm punching accuracy.
FANUC CNC system
A familiar CNC platform simplifies operation, maintenance and support. Existing FANUC experience can transfer to the MT300E without learning a proprietary control environment from scratch.
Five controlled axes: X, Y, V, T and C.
Familiar diagnostics and service practices.
FANUC support infrastructure is available across major markets.
Dati tecnici
| Specification | MT+ 300E-2515 |
|---|---|
| Max. punch force | 300 kN |
| Tipo di guida principale | Servo motor |
| Dimensioni massime di lavorazione del foglio (con riposizionamento in una sola volta) | 5000x1500 mm |
| Spessore max. lamiera di lavorazione | 6 mm |
| Max. punch diameter per time | Φ88.9 mm |
| Corsa di punzonatura max. | 32 mm |
| No. of clamps | 3 pezzi |
| No. of stations | 32 pcs |
| Numero di indici automatici | 2 (C) pcs |
| Precisione di punzonatura | ±0.1 mm |
| Max. feeding speed - X Axis | 80 m/min |
| Max. feeding speed - Y Axis | 80 m/min |
| Max. feeding speed - XY Combined | 113 m/min |
| Worktable Selection - For thickness 3 mm and below | Fine brush fixed worktable |
| Worktable Selection - For thickness 3-4 mm | Brush and steel ball fixed worktable |
| Worktable Selection - For thickness 4-6 mm | All steel ball fixed worktable |
| Max. punch hit at 1 mm pitch with 6 mm stroke | 750 hpm |
| Max. punch hit at 25 mm pitch with 6 mm stroke | 400 hpm |
| Velocità torretta | 30 giri al minuto |
| Sistema CNC | FANUC |
| No. of controlling axis | 5 (X, Y, V, T, C) pcs |
| Dimension (Including safety fence) | 7026×7900×2360 mm |